Tilbake til bloggen
Veiledninger 2026-11-22 Blaze Defense Systems | Tactical Gear: Breaching Tools, QR Kits, Medical, Fire Suppression 0 visninger

Blaze XL brannsikkert avfallssystem: Oppsett og bruk

Blaze XL brannsikkert avfallssystem: Oppsett og bruk

Lær hvordan du setter opp og bruker Blaze XL brannsikkert båresystem som et taktisk brannteppe eller redningsbåre, med praktiske trinn basert på nøkkelfunksjonene.

What the Blaze XL Fire Resistant Litter System Is Built For

The Blaze XL Fire Resistant Litter System serves two primary roles: a fire blanket for emergency tactical operations and a litter system for casualty evacuation. Manufactured from Nomex S/204 materials, it offers lightweight fire resistance while remaining strong enough for rescue tasks. The system includes six bartac-style heavy-duty FR handles, each rated to 1,200 lbf, and weighted corners that help it drape quickly over a burning area.

This guide covers how to set up and deploy the system in both roles, using the supplied specifications and features. Since the manufacturer does not provide step-by-step operating instructions in the available information, the procedures below are based on the system's design and common tactical best practices.

Key Specifications That Drive Setup Decisions

Deploying as a Fire Blanket

The weighted corners allow the blanket to be thrown or draped over a small fire quickly. Use the following steps for emergency deployment.

  1. 1. Remove and Unfold: Grasp two adjacent weighted corners and pull the system from its storage pouch. Shake it open to its full 56" x 84" size.
  2. 2. Drape Over the Fire: Toss the blanket so the weighted corners fall over the burning area, creating a seal that helps smother flames. The Nomex S/204 material resists ignition.
  3. 3. Monitor and Retrieve: After the fire is extinguished or controlled, use the heavy-duty handles to pull the blanket away. Allow it to cool before repacking.

Setting Up as a Rescue Litter

When used for casualty evacuation, the six handles and large surface area allow multiple responders to lift and carry a patient.

  1. 1. Lay Flat on the Ground: Unfold the system completely on a clear surface, with the MOLLE-compatible rear facing down if you plan to attach gear.
  2. 2. Position the Casualty: Roll or slide the patient onto the center of the blanket. Ensure their head is near one end and feet near the other for balanced lifting.
  3. 3. Assign Handles to Responders: Each of the six handles can support up to 1,200 lbf. Distribute handles among team members for even weight distribution.
  4. 4. Lift and Evacuate: On command, all responders lift simultaneously using the handles. The Nomex S/204 material provides strength without adding excessive weight.

MOLLE Attachment and Carry Options

The rear of the system is MOLLE compatible, allowing it to be attached to rescue bags, rear belt systems, vests, and other gear. This makes it easy to carry the litter system as part of a tactical loadout without taking up a dedicated pack slot. Available pouch colors include MultiCam, Black, Ranger Green, Coyote Brown, Wolf Gray, Black Multicam, Rescue Orange, and Rescue Red, so you can match your existing gear or choose high-visibility colors for emergency roles.

What the Supplied Information Does Not Settle

The available product records do not include specific manufacturer instructions for deployment, cleaning, or maintenance of the Nomex S/204 material. For long-term care, follow general best practices for flame-resistant fabrics: avoid bleach, wash with mild detergent, and air dry. The system's handle strength and material properties are confirmed, but no official load-testing data beyond the handle rating is supplied. If you plan to use the litter for vertical evacuation or over long distances, verify your protocol with your team's medical director or equipment specialist.

Relaterte artikler

Customer Service
Hjem
Produkter
Handlekurv
Profil