Original Quick Fist Clamp

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.Key Details25" (25 to 57mm) in diameter. (The diameter of the object you are mounting)Each clamp supports a safe working load of 25lbs (11 kilos).2 clamps support 50lbs (23 kilos).Mounts easily with one #10 bolt or screw.Mounting area: 2 3/4" x 7/8" (70x22mm).TWO CLAMPS PER PACKAGEAdditional DetailsThese are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

• Facebook
• Email
• Print
• X
• Linkedin

Description

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.

Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Key Details

• 25" (25 to 57mm) in diameter. (The diameter of the object you are mounting)
• Each clamp supports a safe working load of 25lbs (11 kilos).
• 2 clamps support 50lbs (23 kilos).
• Mounts easily with one #10 bolt or screw.
• Mounting area: 2 3/4" x 7/8" (70x22mm).
• TWO CLAMPS PER PACKAGE

Additional Details

These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

Key Details

• 25" (25 to 57mm) in diameter. (The diameter of the object you are mounting)
• Each clamp supports a safe working load of 25lbs (11 kilos).
• 2 clamps support 50lbs (23 kilos).
• Mounts easily with one #10 bolt or screw.
• Mounting area: 2 3/4" x 7/8" (70x22mm).
• TWO CLAMPS PER PACKAGE

Additional Details

These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

• Related Products