BTHG-875300 Hydrogel Tape: Uses and Application Tips

Quick answer

Apply BTHG-875300 Hydrogel Tape directly to clean, dry skin over burns, blisters, or minor wounds. Its quick-grab and re-stick properties work well even in wet or cold conditions.

How to apply BTHG-875300 Hydrogel Tape

1. Prepare the wound area: Gently clean the burn, blister, or wound with mild soap and water. Pat the surrounding skin dry—do not rub. For burns, let the area cool first. A common mistake is applying tape over dirty or wet skin, which reduces adhesion and increases infection risk. Clean and dry the skin thoroughly before application.
2. Cut the tape to size: Using clean scissors, cut a piece of BTHG-875300 Hydrogel Tape large enough to cover the wound plus at least 1/2 inch of healthy skin around it. Avoid cutting too small—the tape needs a border to stay in place. A common mistake is cutting the tape too small, causing it to lift at the edges. Cut the tape with a generous border around the wound.
3. Remove the backing and apply: Peel the clear backing off the hydrogel side. Place the gel side directly onto the wound, starting from one edge and smoothing outward to avoid air bubbles. Press gently for 5-10 seconds. A common mistake is touching the gel surface with your fingers, which can transfer oils and reduce adhesion. Handle the tape by the edges only to keep the gel surface clean.
4. Secure the edges if needed: If the tape is in a high-movement area (e.g., a joint), use a strip of medical tape or a cohesive bandage over the edges to prevent peeling. A common mistake is assuming the hydrogel tape alone will stay put on a moving joint—it may need extra reinforcement. Reinforce edges on joints or areas with frequent movement.
5. Monitor and replace as needed: Leave the tape in place for up to 24 hours or until the gel becomes opaque or saturated. Replace with a fresh piece after cleaning the wound. A common mistake is leaving the tape on too long, which can trap moisture and delay healing. Change the tape every 24 hours or sooner if the gel looks saturated.

Product fact

• BTHG-875300 Hydrogel Tape: BTHG-Hydrogel Tape provides excellent quick grab and re-stick capabilities on a wide variety of surfaces in all conditions including wet and cold environments. This means you can apply it reliably in rain, snow, or humid conditions without worrying about the tape peeling off, and you can reposition it if needed without losing adhesion.