Stratus Support System QD Pin Combo: Setup and Use Guide

By Blaze Defense Systems | Tactical Gear: Breaching Tools, QR Kits, Medical, Fire Suppression | Published: 2026-10-22

Category: How-to Guides

Learn how to set up and use the Stratus Support System QD Pin Combo with GEN2 holster and Picatinny rail clamp for quick detach and ambidextrous carry.

Quick Answer

Set up the Stratus Support System QD Pin Combo by attaching the rail clamp to a Picatinny rail, mounting the GEN2 holster, and securing the QD pin for a quick detach, ambidextrous carry system.

Why the QD Pin Combo Works on Any Rail

The Stratus Support System QD Pin Combo is designed for adaptability. It works on any weapon with a Picatinny rail, including 40mm gas launchers and less-lethal weapons. This makes it a versatile choice if you switch between platforms or need a consistent carry solution across different tools.

The system is ambidextrous, so left-handed and right-handed users can set it up the same way without changing parts. That saves time and avoids confusion when multiple users share the same gear.

What the Combo Includes

The combo includes a QD Pin, a GEN2 Holster, and a Rail Clamp with side QD ports. The rail clamp attaches to the Picatinny rail, and the holster mounts to the clamp. The side QD ports give you extra attachment points for slings or lanyards.

The system is also MOLLE compatible, so you can mount the holster on a vest or belt when you are not attaching it to a weapon rail. That flexibility makes it useful for both range use and everyday carry.

Setup Steps

Attach the Rail Clamp: Position the rail clamp on the Picatinny rail at your preferred spot. Tighten the clamp screws evenly, alternating between them to avoid misalignment. Common mistake: over-tightening, which can strip threads or damage the rail. Check that the clamp sits flush against the rail before tightening fully.
Mount the GEN2 Holster: Slide the GEN2 holster onto the rail clamp until it clicks or locks into place. Verify that the holster is oriented for your draw hand (left or right). Common mistake: forcing the holster on when it is not aligned, which can damage the locking mechanism. Confirm the holster locks securely before inserting your weapon.
Insert the QD Pin: Push the QD pin into the holster's attachment point until it snaps. Test the release button to ensure the holster detaches smoothly. Common mistake: not pressing the pin fully, leading to a loose connection that can fail under stress. Cycle the release button several times to ensure smooth operation.
Test the Quick Detach Function: With the holster mounted, practice attaching and detaching it several times. Ensure the release is easy to reach and operates without excessive force. Common mistake: ignoring friction or resistance, which may indicate a misaligned pin or clamp. If release is stiff, re-check the clamp alignment and pin seating.
Adjust for MOLLE Carry (Optional): If you prefer vest or belt carry, remove the holster from the rail clamp and weave the MOLLE straps through your vest or belt. Secure the straps tightly. Common mistake: leaving loose straps that allow the holster to shift during movement. Tug the holster after mounting to ensure it stays in place.

Product Facts

Stratus Support System QD Pin Combo w Rail Clamp (GEN2 Holster, QD Pin & Picatinny Rail Clamp with side QD Ports): Includes QD Pin, GEN2 Holster & Rail clamp w side QD ports. MOLLE compatible for vests or belts. Works on any weapon with a Picatinny Rail System. You get a complete quick-detach system that mounts on a rail now and can transfer to a vest or belt later, without buying extra parts.
Stratus Support System QD Pin Combo w Rail Clamp (GEN2 Holster, QD Pin & Picatinny Rail Clamp with side QD Ports)